Beyerdynamic Semi-Cardioid Condenser Boundary Mic BD708992 $ 409 $449.00
How to get it Learn More
Delivery Not Available
Order Special Order - Request Availability
Talk to a specialist

Chat to us or call 5444 8889

Seen a better price?

Find out more

Description

The TG D71c boundary microphone is primarily used for miking bass drums while placing it simply without any additional mounting material into the bass drum. The non-slip rubber bottom makes sure that the microphone cannot shift by itself.

In addition to this the TG D71c can also be used for other low frequency instruments such as cajon, grand piano or upright piano whereas the compact design and the half-cardioid polar pattern ensure easy positioning of the microphone. Due to its high impulse fidelity, a low attack time and a maximum sound pressure level of 148 dB, the TG D71c is suitable for miking percussion instruments.

The rugged housing in a slim, compact design protects the microphone against damages in the rough daily use on stage. For a permanent installation on a surface there are two mounting holes at the bottom of the microphone. The microphone is provided with an integrated pre-amp and can be powered on microphone inputs supplying 11 to 52 V phantom power. A red illuminating status LED displays the applied phantom power and in this way the operating status of the microphone.

Specifications

Transducer type . . . . . . . . . . . . . . . . Condenser (back electret)
Operating principle . . . . . . . . . . . . . Pressure gradient
Polar pattern . . . . . . . . . . . . . . . . . . Half-cardioid
Frequency response . . . . . . . . . . . . . 25 - 20,000 Hz
Open circuit voltage . . . . . . . . . . . . . 1.5 mV/Pa
Nominal impedance . . . . . . . . . . . . . < 200 ohm
Load impedance. . . . . . . . . . . . . . . . ‚1 k ohm
Max. SPL at 1 kHz . . . . . . . . . . . . . . 148 dB [SPL@1% THD]
Signal-to-noise ratio . . . . . . . . . . . . . 63 dBA, RMS
Wiring . . . . . . . . . . . . . . . . . . . . . . . bal. with 3-pin XLR male
Connection . . . . . . . . . . . . . . . . . . . 3-pin XLR connector
Power supply . . . . . . . . . . . . . . . . . . Phantom power
Power consumption . . . . . . . . . . . . . < 3.2 mA
Dimensions without connector (L x W x H) . . . . . . . . 90 x 86 x 27 mm
Weight. . . . . . . . . . . . . . . . . . . . . . . 424 g

Features

Extremely rugged housing in a compact, slim design Optimal for Bass or Cajon drums
Flexible use with low-frequency instruments
Half-cardioid polar pattern for maximum gain before feedback
High impulse fidelity and low attack time
Undistorted transmission of even high volumes
Powerful, natural sound
Integrated pre-amp
Phantom power 11 - 52 V
Non-slip rubber bottom

Reviews

Please Note: This item may be on display at the Mooloolaba Music Shop and may have been available for demonstration to in store patrons. We take careful and meticulous care, boxing and cleaning of your product before the shipping or selling of an item. If you do want photos before making a purchase please call our shop where one of our staff can assist in sending more detailed images.

Mooloolaba Music reserves the right to cancel, at any time before delivery and for whatever reason, an Order that it has previously accepted. Mooloolaba Music may do this for example, but without limitation, where:

a) Mooloolaba Music's suppliers are unable to supply Goods that they have previously promised to supply
(b) an event beyond Mooloolaba Music's control, such as storm, fire, flood, earthquake, terrorism, power failure, war, strike or failure of computer systems, means that Mooloolaba Music is unable to supply the Goods within a reasonable time
(c) Goods ordered were subject to an error on the Website, for example, in relation to a description, price or image, which was not discovered prior to the Order being accepted;
(d) The products shown in the images above product may differ to the purchased product. Changes could include, different stands, treatments, slight variations in colour, In-built batteries and charging ports. Please contact our team for further clarification.

We ask that you research parts carefully before buying.
Purchase of any non-licenced part as a replacement spare part is at your own risk.
Some branded replacement parts also require professional installation to fit correctly.
If in doubt we will be happy to advise further and confirm suitability before purchase.

More from this category

Added to Cart! 🎉

Product main image Go to Cart

Calculate Shipping

Click and Collect:

Click and collect: is available if the product is available in store.

In Stock

Means the item is physically in the shop and can be bought and shipped or collected at our store.

Order - out of stock:

This item is currently not available physically in our store but can be ordered in from a supplier

In Stock - From Supplier:

Item is available from our supplier. This is an item we do not have available in the store. Please note that there are longer delivery times if you decide to purchase.

In Stock - Available now for delivery:

Item is available and ready to ship from our store.

Low Stock:

Item is in high demand