Low Stock

Radial Cab-Link Passive Speaker Cabinet Merger


$169.00 $189.00

Buy now. Pick up in store or order online.

Buy Now and Pay later |

Need some help?
Chat to a specialist or call 5444 8889

Calculate Shipping


Radial Cab-Link Passive Speaker Cabinet Merger

The Cab-Link provides a simple and compact solution for players who have a single speaker output on their amplifier but want to connect to two cabinets simultaneously.

  • Connect one amplifier output to two speaker cabinets
  • Can use in series or parallel configuration
  • Compact and completely passive, no need for power
  • Additional line output with level control

The simple way to connect two cabinets to your amp
Whether you want to wire up your cabinets in series or in a parallel configuration, the Cab-Link makes things easy. Simply connect two speaker cables from the Cab-Link outputs to each of your cabinets, and a third speaker cable from the output of the amp head to either the series or the parallel input. The Cab-Link reconfigures automatically depending on which input is used, and a handy guide on the top of the unit lets you know which input should be used to best match the impedance between your amp and the cabinets. A line output with a level control provides additional functionality and can be used to feed the input of another amplifier or an effects unit.

Combine cabinets in parallel configuration
Connect two 8 Ohm speaker cabinets in parallel and run both from a single 4 Ohm output on your amplifier.

Combine cabinets in series configuration
Connect two 8 Ohm speaker cabinets in series to use with a 16 Ohm amplifier output.

Use the line out to feed another amplifier
Run a second amplifier from the line out for a wet/dry setup. Fine tune the output with the level control.


The Cab-Link is a completely passive audio merger that allows you to connect a single amp head with two speaker cabinets. It has a maximum power rating of 400 Watts, and can be operated in series or parallel configuration depending on the impedance ratings of the amplifier and cabinets. 14 gauge steel construction and high quality components ensure the Cab-Link will last for years, and a ¼” line output with variable level control provides additional flexibility for signal routing.

  • Audio circuit type: 100% passive
  • Maximum Power Rating: 400W
  • Level Control
  • Input Connectors: 1/4" Series or Parallel
  • Output Connectors: 1/4" Speaker A, Speaker B, Line Out
  • Extras: Trim Control for Line Out
  • Construction: 14-gauge steel chassis & outer shell
  • Size (L x W x D): 4.63" x 3.25" x 1.38" (11.8cm x 8.3cm x 3.5cm)
  • Weight: 1.16lb (0.52kg)
  • Shipping size (L x W x D): 6.25" x 4.25" x 3" (15.9cm x 10.8xm x 7.6cm)
  • Shipping weight: 1.46lb (0.7kg)
  • Power: Passive, no power required
  • Conditions: For use in dry locations only between 5°C and 40°C


Please Note: This item may be on display at the Mooloolaba Music Shop and may have been available for demonstration to in store patrons. We take careful and meticulous care, boxing and cleaning of your product before the shipping or selling of an item. If you do want photos beofre making a purchase please call our shop where one of our staff can assist in sending more detailed images.

Mooloolaba Music reserves the right to cancel, at any time before delivery and for whatever reason, an Order that it has previously accepted. Mooloolaba Music may do this for example, but without limitation, where:

a) Mooloolaba Music's suppliers are unable to supply Goods that they have previously promised to supply
(b) an event beyond Mooloolaba Music's control, such as storm, fire, flood, earthquake, terrorism, power failure, war, strike or failure of computer systems, means that Mooloolaba Music is unable to supply the Goods within a reasonable time
(c) Goods ordered were subject to an error on the Website, for example, in relation to a description, price or image, which was not discovered prior to the Order being accepted;
(d) The products shown in the images above product may differ to the purchased product. Changes could include, different stands, treatments, slight variations in colour, In-built batteries and charging ports. Please contact our team for further clarification.

We ask that you research parts carefully before buying.
Purchase of any non-licenced part as a replacement spare part is at your own risk.
Some branded replacement parts also require professional installation to fit correctly.
If in doubt we will be happy to advise further and confirm suitability before purchase.

You may also like

Warwick RockBoard TRES 3.0 Pedalboard with Gig Bag...

More from this category

JJ Electronic JJKT88 KT88 Power Tube (Single)...
On Stage Osrs7000 Tiltback Guitar Amp Stand Black ...
Marshall MF3.2 Fridge 92 Litre Bar Refrigerator...
Fender Blackface Amplifier Logo...
Marshall Pedl-91003: Dual Latching Led Footswitch...
Tung-Sol 12AX7 Preamp Tube...
Groove Tubes Gt-5u4 Rectifier...
Fender Pure Vintage Sphinx Glides, (4), Nickel...
JJ Electronic 12AY7/6072 Preamplifying Tube...
Mullard EL84 Power Tube...
Gator G-112A 1x12 Combo Amp Transporter Case...
On Stage Osrs4000 Folding Amp Stand Cradle...
Universal Audio Ox Reactive Amp Load Box With Mode...
Fender Pure Vintage Red Amplifier Jewel (1)...
JJ Electronic JJ5751 5751 Preamplifying Tube...

Added to Cart! 🎉

Product main image Go to Cart